Samsung Root J200H 5.1.1 working 100%

Root J200H 5.1.1 working 100%

---

Root J200H 5.1.1 working 100%

Root for Samsung Galaxy J2 SM-J200H 5.1.1
fix after flash samsung logo only

this is the Pre_Rooted firmware

donwload from here

DOWNLOAD

download odin from here

DOWNLOAD

flash it by odin in pda or ap part

dont forget thanks

Samsung Root J200H 5.1.1

Root J200H 5.1.1

---

First in the World

Root for Samsung Galaxy J2 SM-J200H 5.1.1



fix after flash samsung logo only

this is the Pre_Rooted firmware

download firmware from here

flash it by z3x in pda part

dont forget thanks 

Free Download 

Meizu flyme mx5 pattern lock

Meizu flyme mx5 pattern lock

---

21:21:29 > Connecting...
21:21:29 > CPU TYPE:MT6795
21:21:29 > Hardware version:CA00
21:21:29 > Software version:0000
21:21:29 > SecCfgVal :0x07000000
21:21:29 > BromVersion :0x05
21:21:29 > BLVersion :0xFE
21:21:33 > Boot downloading...

NOTHIMG HAPPEN WHEN TRY TO FORMAT OR REMOVE PATERN OR FORMAT LOCKS

HELP ME PLS

IMEI Repair Lenovo Tab 2 A7-30HC

IMEI Repair Lenovo Tab 2 A7-30HC

---

For my device, the IMEI number was printed on the box so it was
relatively easy to restore it.
The first thing is to open the device in engineering mode. This is
done with the following code *#*#3646633#*#*
Then swipe to Connectivity and tap CDS Information, then tap on Radio
Information. Then tap on Phone 1.

Then enter AT+ EGMR=1,7,"IMEI" and press SEND AT COMMAND. (Where IMEi is IMEi no of your device)
Make sure there is a space between AT+ and EGMR otherwise you will
get an error. Also dont forget ”"
Once the command is sent, reboot your device and then check the IMEI
number again by using *#06#.
This method works with all varients of Lenovo A7-30

G92FF AFTER FLASHING AUTO RESTART BY OCTOPUS BOX ver 2.1.6

G92FF AFTER FLASHING AUTO RESTART BY OCTOPUS BOX ver 2.1.6

---

I Have another S6 G925F need to upgrade v5.1.1 arabic version. flashing not finish.. ( writing firmware failed hidden section )
=REaD PIT
=ROOT MOBILE.. FINISH.
BUT PROBLEM IF MOBILE PRESS OFF.. MOBILE AUTO RESTART..
Welcome to Octoplus/Octopus Box Samsung software version 2.1.6
-----------------------------------------------------------------------------------
To connect SM-G925F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: G925FXXU3COJ1_G925FOJP3COJ1_KSA_Android_5.1.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing Firmware Failed
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Reading PIT canceled.
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Reading PIT...
PIT was read successfully.
Selected firmware file: sm-g925f_root_android_5.1.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Firmware writing successfully completed.
NEED help please..............

 

Originally Posted by snipper_gsm

I Have another S6 G925F need to upgrade v5.1.1 arabic version. flashing not finish.. ( writing firmware failed hidden section )
=REaD PIT
=ROOT MOBILE.. FINISH.
BUT PROBLEM IF MOBILE PRESS OFF.. MOBILE AUTO RESTART..
Welcome to Octoplus/Octopus Box Samsung software version 2.1.6
-----------------------------------------------------------------------------------
To connect SM-G925F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: G925FXXU3COJ1_G925FOJP3COJ1_KSA_Android_5.1.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing Firmware Failed
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Reading PIT canceled.
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Reading PIT...
PIT was read successfully.
Selected firmware file: sm-g925f_root_android_5.1.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Firmware writing successfully completed.
NEED help please..............

Galaxy s6 all model having problem you need uni kernal boot and recovery ... or simply instal custom rom twrp recovery and enjoy..
Allah Bless You All

Samsung Root G903w 5.1.1 File

Root G903w 5.1.1

---

Like title i need root G903W 5.1.1 Please share me .

 Link root G903W 5.1.1 OJ9 .
https://download.chainfire.eu/779/CF...xx-smg903f.zip

G920F cert

G920F cert

---

Welcome to Octoplus/Octopus Box Samsung software version 2.1.3
-----------------------------------------------------------------------------------
To connect GT-I9060I phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
To connect SM-G920F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM4
Selected model: SM-G920F
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Thu Oct 1 14:59:12 KST 2015
PDA version: G920FXXU3COJ1
CSC version: G920FOJP3COJ1
SW version: G920FXXU3COI9
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 5.1.1 (LMY47X)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM4
Selected model: SM-G920F
Detected phone model: SM-G920F
Firmware compiled date: Thu Oct 1 14:59:12 KST 2015
PDA version: G920FXXU3COJ1
CSC version: G920FOJP3COJ1
SW version: G920FXXU3COI9
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-SM-G920F-Unknown31-12-2015_20-32-08-.asec
file
Wiping EFS...
Phone will restart now. Please don't disconnect cable!
EFS wipe successfully
Searching for a phone. Please wait...
Detected phone model: SM-G920F
Firmware compiled date: Thu Oct 1 14:59:12 KST 2015
PDA version: G920FXXU3COJ1
CSC version: G920FOJP3COJ1
SW version: G920FXXU3COI9
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 5.1.1 (LMY47X)
Repairing security
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM4
Selected model: SM-G920F
Selected file: G:\SAMSUNG\sert&qcn\cert-sm-g920f.cert
Detected phone model: SM-G920F
Firmware compiled date: Thu Oct 1 14:59:12 KST 2015
PDA version: G920FXXU3COJ1
CSC version: G920FOJP3COJ1
SW version: G920FXXU3COI9
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-SM-G920F-Unknown31-12-2015_20-49-07-.asec
file
Checking Certificate file...
Certificate file successfully checked
Deactivating MSL...

and stop.............

any idya ??

riginally Posted by waelkawasaki

Welcome to Octoplus/Octopus Box Samsung software version 2.1.3
-----------------------------------------------------------------------------------
To connect GT-I9060I phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
To connect SM-G920F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM4
Selected model: SM-G920F
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Thu Oct 1 14:59:12 KST 2015
PDA version: G920FXXU3COJ1
CSC version: G920FOJP3COJ1
SW version: G920FXXU3COI9
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 5.1.1 (LMY47X)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM4
Selected model: SM-G920F
Detected phone model: SM-G920F
Firmware compiled date: Thu Oct 1 14:59:12 KST 2015
PDA version: G920FXXU3COJ1
CSC version: G920FOJP3COJ1
SW version: G920FXXU3COI9
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-SM-G920F-Unknown31-12-2015_20-32-08-.asec
file
Wiping EFS...
Phone will restart now. Please don't disconnect cable!
EFS wipe successfully
Searching for a phone. Please wait...
Detected phone model: SM-G920F
Firmware compiled date: Thu Oct 1 14:59:12 KST 2015
PDA version: G920FXXU3COJ1
CSC version: G920FOJP3COJ1
SW version: G920FXXU3COI9
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 5.1.1 (LMY47X)
Repairing security
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM4
Selected model: SM-G920F
Selected file: G:\SAMSUNG\sert&qcn\cert-sm-g920f.cert
Detected phone model: SM-G920F
Firmware compiled date: Thu Oct 1 14:59:12 KST 2015
PDA version: G920FXXU3COJ1
CSC version: G920FOJP3COJ1
SW version: G920FXXU3COI9
Phone IMEI: Unknown
Phone SN: 00000000000
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-SM-G920F-Unknown31-12-2015_20-49-07-.asec
file
Checking Certificate file...
Certificate file successfully checked
Deactivating MSL...

and stop.............

any idya ??

 

Micromax A120 unknown baseband Fix One Click

Micromax A120 unknown baseband Fix One Click

---

Micromax A120 unknown baseband Fix One Click With
Miracle box And Miracle Key
Powered BY [SV] Miracle Team

G925F Phone IMEI: Unknown NEED CERT

G925F Phone IMEI: Unknown NEED CERT NEED OK CERT AND HELP ME Platform: Samsung Android Selected port: COM75 Selected model: SM-G925F Detected phone model: SM-G925F Firmware compiled date: Wed Aug 12 17:11:31 KST 2015 PDA version: G925FXXU2COH2 CSC version: Unknown SW version: G925IDVU3DOJ6 Phone IMEI: Unknown Checking Root: Phone is Rooted. Reading security backup, please wait... Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung \BACKUP\Security-SM-G925F-Unknown31-12-2015_16-17-24-.asec file Wiping EFS... Phone will restart now. Please don't disconnect cable! EFS wipe successfully Searching for a phone. Please wait... ADB server killed. Detected phone model: SM-G925F Firmware compiled date: Wed Aug 12 17:11:31 KST 2015 PDA version: G925FXXU2COH2 CSC version: Unknown SW version: G925IDVU3DOJ6 Phone IMEI: Unknown Repairing security ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM75 Selected model: SM-G925F Selected file: C:\Documents and Settings\sadiqsajan\My Documents \Downloads\Compressed\cert-sm-g925f_359521062182045 _rf8g40y4nrm\cert-sm-g925f_359521062182045_rf8g40y4nrm.cert Detected phone model: SM-G925F Firmware compiled date: Wed Aug 12 17:11:31 KST 2015 PDA version: G925FXXU2COH2 CSC version: Unknown SW version: G925IDVU3DOJ6 Phone IMEI: Unknown Checking Root: Phone is Rooted. Reading security backup, please wait... Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung \BACKUP\Security-SM-G925F-Unknown31-12-2015_16-19-46-.asec file Checking Certificate file... Certificate file successfully checked Deactivating MSL...

G925F Phone IMEI: Unknown NEED CERT

G925F Phone IMEI: Unknown NEED CERT

---

G925F Phone IMEI: Unknown NEED CERT SIGNAK WEEK ONLY E SIGNAL 4G NOT WARKING AFTER 5 MEINT EMEGACY CALL

Platform: Samsung Android

Selected port: COM75

Selected model: SM-G925F

Reading info, please wait...

ADB server killed.

Detected phone model: SM-G925F

Firmware compiled date: Wed Aug 12 17:11:31 KST 2015

PDA version: G925FXXU2COH2

CSC version: Unknown

SW version: G925IDVU3DOJ6

Phone IMEI: Unknown

-----------------------------------------------------------------------------------

Platform: Samsung Android

Selected port: COM75

Selected model: SM-G925F

Operation was canceled

Writing Certificate failed

-----------------------------------------------------------------------------------

Platform: Samsung Android

Selected port: COM75

Selected model: SM-G925F

Selected file: C:\Documents and Settings\sadiqsajan\My Documents

\Downloads\Compressed\cert-sm-g925f_359521062182045

_rf8g40y4nrm\cert-sm-g925f_359521062182045_rf8g40y4nrm.cert

Detected phone model: SM-G925F

Firmware compiled date: Wed Aug 12 17:11:31 KST 2015

PDA version: G925FXXU2COH2

CSC version: Unknown

SW version: G925IDVU3DOJ6

Phone IMEI: Unknown

Checking Root:

Phone is Rooted.

Reading security backup, please wait...

Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung

\BACKUP\Security-SM-G925F-Unknown31-12-2015_15-48-48-.asec

file

Checking Certificate file...

Certificate file successfully checked

Deactivating MSL...

-----------------------------------------------------------------------------------

Platform: Samsung Android

Selected port: COM75

Selected model: SM-G925F

Selected file must be *.cert

Writing Certificate failed

-----------------------------------------------------------------------------------

Platform: Samsung Android

Selected port: COM75

Selected model: SM-G925F

Reading info, please wait...

Can't kill external ADB references. Please, close all programs that use

ADB server.

Proper android device not found. Make shure that "USB debug" option

on the device is turned on.

-----------------------------------------------------------------------------------

Platform: Samsung Android

Selected port: COM75

Selected model: SM-G925F

Reading info, please wait...

ADB server killed.

Detected phone model: SM-G925F

Firmware compiled date: Wed Aug 12 17:11:31 KST 2015

PDA version: G925FXXU2COH2

CSC version: Unknown

SW version: G925IDVU3DOJ6

Phone IMEI: Unknown

-----------------------------------------------------------------------------------

Platform: Samsung Android

Selected port: COM75

Selected model: SM-G925F

Selected file must be *.cert

Writing Certificate failed

-----------------------------------------------------------------------------------

Platform: Samsung Android

Selected port: COM75

Selected model: SM-G925F

Selected file must be *.cert

Writing Certificate failed

-----------------------------------------------------------------------------------

Platform: Samsung Android

Selected port: COM75

Selected model: SM-G925F

ADB server killed.

Detected phone model: SM-G925F

Firmware compiled date: Wed Aug 12 17:11:31 KST 2015

PDA version: G925FXXU2COH2

CSC version: Unknown

SW version: G925IDVU3DOJ6

Phone IMEI: Unknown

Checking Root:

Phone is Rooted.

Reading security backup, please wait...

Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung

\BACKUP\Security-SM-G925F-Unknown31-12-2015_16-02-33-.asec

file

Wiping EFS...

Phone will restart now. Please don't disconnect cable!

EFS wipe successfully

Searching for a phone. Please wait...

Can't kill external ADB references. Please, close all programs that use

ADB server.

Proper android device not found. Make shure that "USB debug" option

on the device is turned on.

-----------------------------------------------------------------------------------

Platform: Samsung Android

Selected port: COM75

Selected model: SM-G925F

Reading info, please wait...

ADB server killed.

Detected phone model: SM-G925F

Firmware compiled date: Wed Aug 12 17:11:31 KST 2015

PDA version: G925FXXU2COH2

CSC version: Unknown

SW version: G925IDVU3DOJ6

Phone IMEI: Unknown

Octopus Support not working with opera [Solved]

Octopus Support not working with opera [Solved]

---

1. i install latest version 2.1.6 same errro

You need to login!
To login, please use Octopus Box Suit


2.install old version 1.7.5 same error

You need to login!
To login, please use Octopus Box Suit

Also update smart card fimware sucesss

and install support suit also and then open support but still same

Micromax A315 Dead Recovered With Simple Flashing

Micromax A315 Dead Recovered With Simple Flashing

---

Micromax A315 Dead Recovered With Simple Flashing With

Miracle box And Miracle Key

Powered BY [SV] Miracle Team

Micromax aq4501 Stuck On logo done By Simple Flashing

Micromax aq4501 Stuck On logo done By Simple Flashing

---

Micromax aq4501 Stuck On logo done By Simple Flashing With
Miracle box And Miracle Key
Powered BY [SV] Miracle Team

Intex Aqua 3g Stuck On logo DOne With One Click Format

Intex Aqua 3g Stuck On logo DOne With One Click Format

---

Intex Aqua 3g Stuck On logo DOne With One Click Format With

Miracle box And Miracle Key

Powered BY [SV] Miracle Team

Gionee G5 Dead Recovered With Simple Flashing

Gionee G5 Dead Recovered With Simple Flashing

---

Gionee G5 Dead Recovered With Simple Flashing With

Miracle box And Miracle Key

Powered BY [SV] Miracle Team

Intex y2Pro Stuck On logo Done One Click Format

Intex y2Pro Stuck On logo Done One Click Format

---

Intex y2Pro Stuck On logo Done One Click Format With
Miracle box And Miracle Key
Powered BY [SV] Miracle Team

Micromax A101 Dead Recovered With Simple Flashing

Micromax A101 Dead Recovered With Simple Flashing

---

Micromax A101 Dead Recovered With Simple Flashing With
Miracle box And Miracle Key
Powered BY [SV] Miracle Team

Micromax A96 Dead Recovered Easily With Simple Flashing

Micromax A96 Dead Recovered Easily With Simple Flashing

---

Micromax A96 Dead Recovered Easily With Simple Flashing With
Miracle box And Miracle Key
Powered BY [SV] Miracle Team

Karbonn a90 Dead Recovered With Simple Flashing

Karbonn a90 Dead Recovered With Simple Flashing

---

Karbonn a90 Dead Recovered With Simple Flashing With

Miracle box And Miracle Key

Powered BY [SV] Miracle Team

Karbonn Titanium S5 Plus Stuck On logo Done One Click Format

Karbonn Titanium S5 Plus Stuck On logo Done One Click Format

---

Karbonn Titanium S5 Plus Stuck On logo Done One Click Format With
Miracle box And Miracle Key
Powered BY [SV] Miracle Team

BEWARE PAyPAL HACKER!

BEWARE PAyPAL HACKER!

---

THEY USED SEND MY MONEY TO SEND HIS PAYPAL ACCOUNt..

2500$ + 2800$ TOTAL OF 5,300$. IF ANYONE KNOW THIS GUY PLS PM AND UPDATE ON THIS THREAD.

PLS BEWARE ON THIS NAME AND PAYPAL ID:

-----------------------------------

Details of disputed transaction

-----------------------------------

Recipient's Name: Brandon Drinnon

Recipient's Email: bdrinn918@gmail.com

Recipient's Transaction ID: 9TB39146RL678645L

Transaction Date: Dec 25, 2015

Transaction Amount: -$2,500.00 USD

Your Transaction ID: 59A87031SS1782147

Case Number: PP-004-452-659-558

Sender's Transaction ID: 59A87031SS1782147

==========================================

----------------------------------

Details of disputed transaction

-----------------------------------

Recipient's Name: tates one stop

Recipient's Email: oliveramory@yahoo.com

Recipient's Transaction ID: 528496751A8392342

Transaction Date: Dec 25, 2015

Transaction Amount: -$2,800.00 USD

Your Transaction ID: 9XW842332R719492M

Case Number: PP-004-452-651-498

Sender's Transaction ID: 9XW842332R719492M

Karbonn Tab A39Hd Stuck On Logo Done One Click Format

Karbonn Tab A39Hd Stuck On Logo Done One Click Format

---

Karbonn Tab A39Hd Stuck On Logo Done One Click Format With
Miracle box And Miracle Key
Powered BY [SV] Miracle Team

Micromax B37A MTK6572 Monkey Virus Removed With Volcano Box Merpai 1.3.5 Beta

Micromax B37A MTK6572 Monkey Virus Removed With Volcano Box Merpai 1.3.5 Beta

---

Micromax B37A MTK6572 Monkey Virus Removed With Volcano Box Merpai 1.3.5 Beta

Clean Virus

Do Format After Clean Virus

Q Moile X2 Music spd 7715 nand Hang On StartUp Solved

Q Moile X2 Music spd 7715 nand Hang On StartUp Solved

---

Quote:

>>Analysis of USB port,Please insert phone USB cable. 06:59:59 > 06:59:59 > Internal version: SPRD3 >>Boot downloaded. 07:00:00 > Start boot please wait a moment.... 07:00:02 > Spreadtrum Boot Block version 1.1 >>Boot downloaded. 07:00:02 > CPU TYPE:SC7710G[7715A000] >>Boot downloaded. 07:00:03 > Flash ID: 009800BC9066 07:00:03 > Flash Type:[TOSHIBA] TYBC0A111236KC10 07:00:03 > FLASH LEN:0x20000000 07:00:03 > >>Erase flash complete. >>Writing completed.

Reall World Ist Q Mobile X2i Spd 7715 Nand Read,Format,Write Done Merapi Tool

Reall World Ist Q Mobile X2i Spd 7715 Nand Read,Format,Write Done Merapi Tool

---

World Ist Q Mobile X2i Spd 7715 Nand Read,Write,Format Done Only With Volcano Merapi Tool
Now Spd 7715 Nand Fully Supported Only On With Volcano Merapi Tool.
Reall and Perfact Solution No Face After Read,Write,Format Problem.
Like Merapi Tool Work As Friend

Read Flash File With In 5 Mint .
Format Done
Writing Firmware , After Format No Issue Like Dead, Hang or Restart Problem.

JIVI JSP29 SPD 7715 Read - Format - Write Done With Merapi Tool

JIVI JSP29 SPD 7715 Read - Format - Write Done With Merapi Tool

---

JIVI JSP29 SPD 7715 Read - Format - Write Done With Merapi Tool












More Hot News on the way ...So stay with US ..

Zigo Eon 52I MT6582 EMMC 8GB Read/Write BIN, FAC File & Format Done With Merapi

Zigo Eon 52I MT6582 EMMC 8GB Read/Write BIN, FAC File & Format Done With Merapi

---

Zigo Eon 52I MT6582 EMMC 8GB Read/Write BIN, FAC File & Format Done With Merapi


Read Flash ( .BIN )





Write Flash ( .BIN )





Format





Split Readed BIN File to Factory Flash File





Write Splitted Factory Flash File

World Ist SamSung S7262 Orginal Spd 8825 Format Done Only With Volcano Merapi Tool

World Ist SamSung S7262 Orginal Spd 8825 Format Done Only With Volcano Merapi Tool

---

Again World Ist Samsung Orginal Gt-S7262 Spd 8825 Format Done Only With Volcano Merapi tool.
After Format No Face Any Problem.

Quote:

>>Analysis of USB port,Please insert phone USB cable. 05:48:20 > 05:48:20 > Internal version: SPRD3 >>Boot downloaded. 05:48:20 > Start boot please wait a moment.... 05:48:22 > Spreadtrum Boot Block version 1.1 >>Boot downloaded. 05:48:22 > CPU TYPE:SC8825/6825[8820D000] >>Boot downloaded. 05:48:26 > CPU TYPE:SC8825/6825[8820D000] 05:48:26 > FLASH ID : 1501004E355530304D 05:48:26 > FLASH LEN : 0xE9000000 05:48:26 > The phone is setting back to Factory...

E-Tel Curiosity I100 SPD7710G Read Flash Done With Merapi 1.3.5 Beta

E-Tel Curiosity I100 SPD7710G Read Flash Done With Merapi 1.3.5 Beta

---

E-Tel Curiosity I100 SPD7710G Read Flash Done With Merapi 1.3.5 Beta

Micromax X222 Hang On Logo 1 Click Done :-)

Micromax X222 Hang On Logo 1 Click Done :-)
Phone Image
Read Info

Quote:

13:19:20 > Merapi Updated: 2015-11-20 13:19:20 > Connecting... 13:19:22 > Connection successful,connected state! 13:19:22 > Version: V3.8 13:19:22 > SN: HI-TECH BETA TEST 13:19:23 > Connecting to server... 13:19:26 > Connecting to server...OK! 13:19:26 > Getting function information from server... 13:19:27 > Getting function information from server...OK! 14:50:10 > Access to functional permissions from server... 14:50:11 > Access to functional permissions from server...OK! 14:50:11 > 14:50:11 > 14:50:11 > >>Analysis of USB port,Please insert phone USB cable. 14:50:36 > Connecting... 14:50:36 > Hardware version:CB02 14:50:36 > Software version:0101 14:50:36 > CPU TYPE:6252 14:50:36 > Internal version:8B00 >>Boot downloading complete! 14:50:39 > Flash ID: 00C2002500370000 14:50:39 > Flash Type: SF_MX25U6435E 14:50:39 > Chip Capacity: 0x800000(8MB) 14:50:39 > Mobile phone software version for:E910_MP_F1_15 >>Baud adjust...complete.

Read Flash

Quote:

13:19:20 > Merapi Updated: 2015-11-20 13:19:20 > Connecting... 13:19:22 > Connection successful,connected state! 13:19:22 > Version: V3.8 13:19:22 > SN: HI-TECH BETA TEST 13:19:23 > Connecting to server... 13:19:26 > Connecting to server...OK! 13:19:26 > Getting function information from server... 13:19:27 > Getting function information from server...OK! 14:50:10 > Access to functional permissions from server... 14:50:11 > Access to functional permissions from server...OK! 14:50:54 > 14:50:54 > 14:50:54 > >>Analysis of USB port,Please insert phone USB cable. 14:51:02 > Connecting... 14:51:02 > Hardware version:CB02 14:51:02 > Software version:0101 14:51:02 > CPU TYPE:6252 14:51:02 > Internal version:8B00 >>Boot downloading complete! 14:51:04 > Flash ID: 00C2002500370000 14:51:04 > Flash Type: SF_MX25U6435E 14:51:04 > Chip Capacity: 0x800000(8MB) 14:51:04 > Mobile phone software version for:E910_MP_F1_15 >>Baud adjust...complete. >>Flash reading complete! 14:51:26 > privacy:0000

Format

Quote:

13:19:20 > Merapi Updated: 2015-11-20
13:19:20 > Connecting...
13:19:22 > Connection successful,connected state!
13:19:22 > Version: V3.8
13:19:22 > SN: HI-TECH BETA TEST
13:19:23 > Connecting to server...
13:19:26 > Connecting to server...OK!
13:19:26 > Getting function information from server...
13:19:27 > Getting function information from server...OK!
14:51:40 >
14:51:40 >
14:51:40 >
>>Analysis of USB port,Please insert phone USB cable.
14:51:48 > Connecting...
14:51:48 > Hardware version:CB02
14:51:48 > Software version:0101
14:51:48 > CPU TYPE:6252
14:51:48 > Internal version:8B00
>>Boot downloading complete!
14:51:50 > Flash ID: 00C2002500370000
14:51:50 > Flash Type: SF_MX25U6435E
14:51:50 > Chip Capacity: 0x800000(8MB)
14:51:50 > Mobile phone software version for:E910_MP_F1_15
>>Baud adjust...complete.
14:51:52 > Format range: Start Address: 0x740000,Format Length :0x0C0000
>>Flash erasing complete! 

Lava Flair P1I Write Flash Done With Merapi 1.3.5 Beta

Lava Flair P1I Write Flash Done With Merapi 1.3.5 Beta
CPU TYPE 7710G/7715
Phone Image


Write Flash Done

Quote:

21:56:16 > Merapi Updated: 2015-11-20 21:56:16 > Connecting... 21:56:18 > Connection successful,connected state! 21:56:18 > Version: V3.8 21:56:18 > SN: Hi-Tech Beta Test 21:56:21 > Connecting to server... 21:56:24 > Connecting to server...OK! 21:56:25 > Getting function information from server... 22:48:08 > Access to functional permissions from server...OK! >>Analysis of USB port,Please insert phone USB cable. 22:48:17 > 22:48:17 > Internal version: SPRD3 >>Boot downloaded. 22:48:19 > Start boot please wait a moment.... 22:48:21 > Spreadtrum Boot Block version 1.1 >>Boot downloaded. 22:48:21 > CPU TYPE:SC7710G[7715A000] >>Boot downloaded. 22:48:22 > Flash ID: 009800BC9066 22:48:22 > Flash Type:[TOSHIBA] TYBC0A111236KC10 22:48:22 > FLASH LEN:0x20000000 22:48:22 > >>Erase flash complete. >>Writing completed.

Truly World 1st All Done No Dead No Hang On Logo Only With Merapi Other Tool Fail To Read Or Not Supported....

Still Don't Have Merapi Buy Now & Enjoy

Boss Back In Action

Lava Flair P1I Read Info & Read Flash Done With Merapi 1.3.5 Beta

Lava Flair P1I Read Info & Read Flash Done With Merapi 1.3.5 Beta
CPU TYPE 7710G/7715
Read Info

Quote:

21:56:16 > Merapi Updated: 2015-11-20 21:56:16 > Connecting... 21:56:18 > Connection successful,connected state! 21:56:18 > Version: V3.8 21:56:18 > SN: Hi-Tech Beta Test 21:56:21 > Connecting to server... 21:56:24 > Connecting to server...OK! 21:56:25 > Getting function information from server... 21:56:26 > Getting function information from server...OK! 22:16:37 > Access to functional permissions from server... 22:16:38 > Access to functional permissions from server...OK! >>Analysis of USB port,Please insert phone USB cable. 22:16:42 > 22:16:43 > Internal version: SPRD3 >>Boot downloaded. 22:16:44 > Start boot please wait a moment.... 22:16:46 > Spreadtrum Boot Block version 1.1 >>Boot downloaded. 22:16:46 > CPU TYPE:SC7710G[7715A000] >>Boot downloaded. 22:16:47 > Flash ID: 009800BC9066 22:16:47 > Flash Type:[TOSHIBA] TYBC0A111236KC10 22:16:47 > FLASH LEN:0x20000000 22:16:47 >

Read Flash

Quote:

21:56:16 > Merapi Updated: 2015-11-20 21:56:16 > Connecting... 21:56:18 > Connection successful,connected state! 21:56:18 > Version: V3.8 21:56:18 > SN: Hi-Tech Beta Test 21:56:21 > Connecting to server... 21:56:24 > Connecting to server...OK! 21:56:25 > Getting function information from server... 21:56:26 > Getting function information from server...OK! 21:57:08 > Access to functional permissions from server... 21:57:09 > Access to functional permissions from server...OK! >>Analysis of USB port,Please insert phone USB cable. 21:57:24 > 21:57:24 > Internal version: SPRD3 >>Boot downloaded. 21:57:28 > Start boot please wait a moment.... 21:57:30 > Spreadtrum Boot Block version 1.1 >>Boot downloaded. 21:57:31 > CPU TYPE:SC7710G[7715A000] >>Boot downloaded. 21:57:36 > Flash ID: 009800BC9066 21:57:36 > Flash Type:[TOSHIBA] TYBC0A111236KC10 21:57:36 > FLASH LEN:0x20000000 21:57:36 > >>Reading completed. 22:09:33 > Read time: 11 min 55 s

World Ist X2 Music Spd 7715 Read/Write/Format Done

World Ist X2 Music Spd 7715 Read/Write/Format Done

---

Q Mobile X2 Music Spd 7715 Read/Write/Format Fully Supported With Merapi Tool
Read Flash File

Write Flash File

Format