G92FF AFTER FLASHING AUTO RESTART BY OCTOPUS BOX ver 2.1.6

G92FF AFTER FLASHING AUTO RESTART BY OCTOPUS BOX ver 2.1.6

---

I Have another S6 G925F need to upgrade v5.1.1 arabic version. flashing not finish.. ( writing firmware failed hidden section )
=REaD PIT
=ROOT MOBILE.. FINISH.
BUT PROBLEM IF MOBILE PRESS OFF.. MOBILE AUTO RESTART..
Welcome to Octoplus/Octopus Box Samsung software version 2.1.6
-----------------------------------------------------------------------------------
To connect SM-G925F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: G925FXXU3COJ1_G925FOJP3COJ1_KSA_Android_5.1.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing Firmware Failed
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Reading PIT canceled.
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Reading PIT...
PIT was read successfully.
Selected firmware file: sm-g925f_root_android_5.1.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Firmware writing successfully completed.
NEED help please..............

 

Originally Posted by snipper_gsm

I Have another S6 G925F need to upgrade v5.1.1 arabic version. flashing not finish.. ( writing firmware failed hidden section )
=REaD PIT
=ROOT MOBILE.. FINISH.
BUT PROBLEM IF MOBILE PRESS OFF.. MOBILE AUTO RESTART..
Welcome to Octoplus/Octopus Box Samsung software version 2.1.6
-----------------------------------------------------------------------------------
To connect SM-G925F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: G925FXXU3COJ1_G925FOJP3COJ1_KSA_Android_5.1.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing Firmware Failed
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Reading PIT canceled.
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Reading PIT...
PIT was read successfully.
Selected firmware file: sm-g925f_root_android_5.1.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G925F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Firmware writing successfully completed.
NEED help please..............

Galaxy s6 all model having problem you need uni kernal boot and recovery ... or simply instal custom rom twrp recovery and enjoy..
Allah Bless You All